Washington State

Office of the Attorney General

Attorney General

Bob Ferguson

FOR IMMEDIATE RELEASE:

Federal judge found previous attempt unlawful

SEATTLE — Attorney General Bob Ferguson announced his office will challenge the Trump Administration’s latest effort to allow 3D-printed gun files to be released on the internet, leading a coalition of 21 states in a new federal lawsuit. These files would allow plug-and-play access to 3D-print unregistered, untraceable firearms that can also be very difficult to detect, even with a metal detector. Untraceable firearms are sometimes called “ghost guns.”

As a result of Ferguson’s previous multistate lawsuit, a federal judge in Seattle struck down the Trump Administration’s prior attempt to allow the release of the files. Now, the administration has embarked on a new effort by pursuing formal rules. Those rules were made available to the public Friday, and are expected to be finalized this week.

When the rules are finalized, Ferguson and the multistate coalition will file a lawsuit in Seattle in the U.S. District Court for the Western District of Washington, arguing those rules are unlawful for many of the same reasons as the previous attempt.

“Why is the Trump Administration working so hard to allow domestic abusers, felons and terrorists access to untraceable, undetectable 3D-printed guns?” Ferguson said. “Even the president himself said in a tweet that this decision didn’t make any sense — one of the rare instances when I agreed with him. We will continue to stand up against this unlawful, dangerous policy.”

In 2015, Defense Distributed, an organization dedicated to global distribution of open-source, downloadable 3D-printed guns, sued the Obama Administration after the U.S. State Department forced Defense Distributed to remove the files from the internet. The federal government successfully argued before federal trial and appellate courts that posting the files online violates firearm export laws and poses a serious threat to national security and public safety. The United States Supreme Court declined to hear the case.

In defending against Defense Distributed’s lawsuit, the federal government previously stated it was “particularly concerned that [the] proposed export of undetectable firearms technology could be used in an assassination, for the manufacture of spare parts by embargoed nations, terrorist groups, or to compromise aviation security overseas in a manner specifically directed at U.S. persons.”

Then, in an abrupt reversal, the Trump Administration settled the case on June 29, 2018. As part of the settlement, the Trump Administration agreed to allow unlimited public distribution on the internet of the downloadable files for 3D-printed guns.

In July 2018, President Trump wrote on Twitter: “I am looking into 3-D Plastic Guns being sold to the public. Already spoke to NRA, doesn’t seem to make much sense!”

Ferguson filed a lawsuit July 30, 2018. On Nov. 12, 2019, Judge Robert Lasnik ruled that the Trump Administration’s decision to allow the files’ distribution was arbitrary, capricious and unlawful.

“Given the agency's prior position regarding the need to regulate 3D-printed firearms and the CAD files used to manufacture them, it must do more than simply announce a contrary position,” Judge Lasnik wrote. “Overall, the Department of State concluded that the worldwide publication of computerized instructions for the manufacture of undetectable firearms was a threat to world peace and the national security interests of the United States and would cause serious and long-lasting harm to its foreign policy. Against these findings, the federal defendants offer nothing.”

After losing in court, the Trump Administration is trying again, this time by publishing new rules that would transfer regulation of 3D-printed guns from the State Department to the Department of Commerce, effectively allowing their unlimited distribution.

Trump Administration acknowledges risks, “grave concern”

In the rules, the administration acknowledges the dangers posed by the distribution of 3D-printed gun files: “Such items could be easily used in the proliferation of conventional weapons, the acquisition of destabilizing numbers of such weapons, or for acts of terrorism. … The potential for the ease of access to the software and technology, undetectable means of production, and potential to inflict harm on U.S. persons and allies abroad present a grave concern for the United States.”

However, due to loopholes in the Commerce regulations, the agency will lack the power to regulate 3D-printed guns in any meaningful way.

Regulation is constitutional

The administration also acknowledged that regulating the distribution of 3D-printed gun files does not violate the First or Second Amendments, as some critics have claimed: “Limitations on the dissemination of such functional technology and software do not violate the right to free expression under the First Amendment. Nor does the final rule violate the right to keep and bear arms under the Second Amendment.”

3D-printed gun crime

In 2017, a Texas man was arrested after firing a 3D-printed gun in a wooded area outside Dallas. He had a “hit list” of federal lawmakers, including their home addresses. The man was barred from having a firearm in 2015 after a domestic violence incident.

Legal arguments

Ferguson’s new lawsuit asserts that the rule is unlawful for similar reasons as the previous effort. The administration has still offered no evidence supporting their about-face on the risks of allowing unregulated access to firearms worldwide, making the rule arbitrary and capricious, in violation of the Administrative Procedure Act (APA). In fact, the administration agrees that regulation is needed, even though its new regulations are toothless and will not prevent the global dissemination of 3D-printed guns.

In providing public notice of the rule, the administration mentioned other changes to regulations for small firearms, but not the changes to 3D-printed guns. That failure to provide meaningful public notice also violates the APA.

Assistant Attorneys General Jeff Rupert, Kristin Beneski and Brendan Selby are leading the case for Washington.

Successful legislation in Washington

Ferguson has also taken action on 3D-printed guns at the state level, successfully introducing agency-request legislation to ban the manufacture or possession of untraceable, undetectable 3D-printed guns. The new law also prohibits sending a printable gun file to a person who is ineligible to possess firearms.

Ferguson has filed 54 lawsuits against the Trump Administration and has not lost a case. Ferguson has 24 legal victories against the Trump Administration. Sixteen of those cases are finished and cannot be appealed. The Trump Administration has or may appeal the other eight, which include lawsuits involving Dreamers and rules restricting contraception access. No court to rule on the merits of the Attorney General’s arguments in a lawsuit against the Trump Administration has ruled against the office.

-30-

The Office of the Attorney General is the chief legal office for the state of Washington with attorneys and staff in 27 divisions across the state providing legal services to roughly 200 state agencies, boards and commissions. Visit www.atg.wa.gov to learn more.

Contacts:

Brionna Aho, Communications Director, (360) 753-2727; Brionna.aho@atg.wa.gov

Topic: